Many times not all graphics are stored by the WaybackMachine, so if there are graphics missing from the following VFAQ, please don't email me about them (unless you are emailing me to tell me you have a copy of the missing graphic you can send me).
If you know the original author of this VFAQ, and have their contact info, please have them email me if they have any missing info to add, have the VFAQ at another site I could not find, or wish to have it removed from my site.
| Remove the Blower Cover (you don't need to remove the kick panel unless you want to): |  |
| In the bundle of wires, look for the single wire with a female spade connector: |  |
| This is the Sensor Wire to tap in for your measurements: |  |
| Note: These pictures were taken in a '91 GS-T. Your connector may vary. | |
|
This document can be reprinted for personal use or reference for your mechanic(s) with no prior permission needed. It can be linked to directly, as long as you have a link to the main page of http://www.myzero.com, though linking to the main page instead is preferred. This document can NOT be reprinted for profit/resale/redistribution of ANY type without expressed WRITTEN permission from me in advance. Bulk copying of this document onto your web site without prior permission will not be tolerated, link to it instead. Copyright 1999, Brad Bauer |