To reset a 2GT ECU is really easy.  Just follow these steps:

1. Pop the hood and locate the fuse/relay box behind the passenger-side headlight.  Open the relay box cover.
2. There are two 10A fuses on the lower left hand side of the relay box--one is for radio and the other is for interior lights.  These two fuses are held together by a yellow "bracket."  Just pull these two fuses out, wait for about 5 seconds, and then plug them back in.  That's it!

This works because the radio fuse also provides memory back-up power for the ECU, in addition to providing the memory back-up power for the radio (your clock/station settings).  Removing that fuse for just a few seconds will erase the ECU's volatile memory (and reset it) without losing your favorite radio station settings. 8^)

Warren Tsai
 

http://maritime.dsm.org/

Last Updated: October 19, 1999