The following VFAQ has disappeared from the original site, so I have pulled down a copy from the WaybackMachine.

Many times not all graphics are stored by the WaybackMachine, so if there are graphics missing from the following VFAQ, please don't email me about them (unless you are emailing me to tell me you have a copy of the missing graphic you can send me).

If you know the original author of this VFAQ, and have their contact info, please have them email me if they have any missing info to add, have the VFAQ at another site I could not find, or wish to have it removed from my site.

This VFAQ used to be located at

 Replacing your window trim
Replacing your window trim (MB517813/MB517814) in a 1G Eclipse

Here we see a withered old window trim,

quite common in the 1st generation Eclipses / Talon / Lasers. We will be replacing this trim with factory Mitsubishi components

Open your door and look inside the door jam for the pin holding your stock piece on

After removing the pin, lightly pull up and toward you, then up to remove.

Now gently rest your window trim back onto your door, depress down slightly until you feel the grooves in the door slide into the window trim. Then replace the pin in the door jam. You are now ready to sport your new and clean looking window trim! Enjoy!!

Pro Street Online, Inc. Copyright 2003-2004, All rights reserved.